Question: What Is The Difference Between Ddr3 1066 And 1333?

Can I use 1066 and 1333 Ram together?

No, the correct answer is that it does not matter.

You can mix RAM of both speeds (1066/1333).

The system will automatically use the slower speed, but there is no risk of system crashes.

And no, 1333MHz RAM will not be recognized in a 2009 iMac, but 1066MHz in the 2010 is just fine..

Does RAM speed matter?

Faster RAM will give your PC better performance in certain specific benchmarks, but in terms of actual benefit to most users, having more RAM available is almost always better than having faster RAM. … Graphics cards include their own memory, so games aren’t majorly affected by system RAM speed.

Can you mix RAM of different sizes?

“You Can’t Mix RAM Size.” And there’s a prevailing misconception that you can’t use different RAM size together, or mix RAM brands. That’s not true. … It is advisable to use RAM sticks by the same manufacturer, of the same size, and of the same frequency.

Can I put 1600mhz ram in a 1066mhz slot?

Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used . … both RAMs will run at same speed. If ur first RAM is operating at max 1066mhz then no matter what ,your new RAM will also run at 1066 And the rest of the story anyone can understand of course.

Can I use 2400mhz ram in 2133mhz motherboard?

Yes, you can. When the BIOS detects that the RAM is too fast for the memory controller or faster than the rest of the system memory, the fastest RAM will be clocked down to the speed of the lowest RAM. In your case, the CPU doesn’t support more than 2133 MHz so the additional stick will also be run at that speed.

Can I put any ddr3 RAM in my PC?

Yes. As long as both modules are supported by the motherboard, the faster stick of RAM will clock down to match the slower one. Enjoy your 8 GB of RAM. Also, you do not have to worry too much about breaking your motherboard as long as the memory types match the slots.

Can I use 2 different Ram brands?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … It used to be only the Form Factor that was important, but with low voltage Ram now on the market, that has to be taken into account as well. So yes. Different brands of Ram are fine to use together.

What is the difference between ddr3 1333 and 1600?

The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.

Can you use ddr3 1333 instead of 1600?

Well, yes DDR3 1600 is compatible with DDR3 1333 MHz. But using them together both will have same speed.

Can I use my 1333 MHz RAM in 1600mhz slot?

Yes it will run just fine. The slot can handle 1600mhz stock, and more with OC.

Can I use faster RAM than my motherboard supports?

Rick’s answer: Eric, the short answer to your questions is yes. Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. … 2 – Make sure you don’t purchase individual RAM sticks that are larger than your motherboard can accept.

Can you put ddr3 1333 instead of 1066?

Technically yes. Your motherboard will automatically down clock the 1333 RAM to 1066 to match the other stick. However, it’s always a good idea to buy modules in pairs.

Can ddr3 1066 Replace 1600?

You will likely find that the 1600 RAM will offer better timings at the slower speeds than comparable 1333/1066 RAM – so even if you don’t go for overclocking, there may still be a small performance benefit.

Which is faster 1333MHz or 1600MHz?

2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.